[THERMO-MAGNETIC MOTOR PROTECTION]
The installation overload relay turns off in case of overloading.
Because this relay is installed on automatical reset, after a while the
motors are switched back on automatically.
[Installation and type of overload relay]
220V
Machine
WE55/73/95
WE110/132
WE165 |
Type
LR2D13109
LR2D13149
LR2D13149 |
Value
4-6A
7-10A
7-10A |
Installation
5A
7A
8A |
380V
Machine
WE55/73/95
WE110/132/165 |
Type
LR2D13089
LR2D13109 |
Value
2.5A-4A
4-6A |
Installation
3A
4A |
[Error messages]
E3 (Eprom)
The Eprom is wrong, replace it by another
REMARK: For coin op machines, it is possible that a program
number appears on the right display in combination E3.
This indicates a wrong price adjustment for this program. A coin value “0”
or bigger than “1000” was programmed.
Example: wrong price adjustment for program 5.
E4 (water level)
The appropriate water level was not reached after 15 minutes.
E5 (Heating)
The wash bath did not reach the required temperature after 80 minutes
of
E6 (door lock)
The door lock was released during the wash cycle.
E7 (safety level)
The water was insufficiently drained, the machine did not spin and the
water is possibly still inside the tub.
E8 (temperature sensor)
The temperature sensor is probably broken or malfunctioning.
E9 (motor protection)
The thermo-magnetic protection was activated 5 times.
REMARK: When a malfunction occurs during a program, the
central display will communicate the appropriate error message
at the end of the cycle. When this malfunctional has been removed and
a new program has been selected, this error message also disappears.
When malfunctions E6, E7 or E9 are detected at the start of the wash cycle,
the program will not be started and the error message will remain
on the display.
[Please feel free to Email Metro Laundry tech anytime when you
have question.]